Position:
Steel-aluminum composite lightweight material processing problem solution

Steel-aluminum composite lightweight material processing problem solution

2018-04-04 00:00

Material composites of steel and aluminium have great potential for use in lightweight design in the automotive industry. They have been widely used in automotive manufacturing, but they are not used as a ‘composite’ material.


Within the framework of the cooperation project ‘Inside High Pressure Transformation Technology (IHU-THT) for hybrid steel-aluminium composite laser welded tubes for automotive lightweight design’, the partners' goal is to produce very lightweight, tailor-made hollow tubes - with a high strength in the load-bearing parts. High-strength steel is used for the high load-bearing parts and aluminium for the low load-bearing parts. They try to deform the laser-welded tubes made of steel and aluminium using the IHU process technology.


The Institute for Process Technology Integration (IPH) in Hannover, Germany, and the Laser Technology Centre (LZH) in Hannover plan to try to achieve this. The developers promise that this new technology will reduce the weight of automotive components by up to 20 per cent in the lightweight design and manufacture of automobiles, depending on the specifics of the component. Many companies are also interested in the partnership. Johnson Controls, Qihao Automotive, Laser on Demang, LMB and SET Scientific are among those involved in the project.


Johnson Controls has drawn up a concrete plan: the engineers have designed a complete programme for the seat backrests. ‘On the one hand, we wanted to drastically reduce the weight of the seat backrests using laser-welded tubes. Not only did we rely on the use of a combination of materials from steel and aluminium alloys in a lightweight design to reduce the weight of the seat, but we also tried to reduce the number of parts in the seat components. What we have tried is the direct integration of high-strength parts for seat recliner components. This allows us to omit some of the accessories that have been necessary to use up until now, radically accelerating our global manufacturing.’ says Dr Andreas Eppinger, Vice President for Technology at Johnson Controls.


On the other hand, the design of seatback parts that precisely meet the load-carrying requirements has also opened up a new design approach: the space behind the slim seat frame is more spacious, leaving more knee room for rear seat passengers, making it easier to get in and out of the car, and making the ride significantly more comfortable.


Brazing as an alternative to laser welding


An important joining process technology in automotive production is laser welding. ‘The melting of aluminium and steel produces brittle intermetallic compound phases; their presence significantly reduces the material's performance in deformation processes. Therefore, we replaced laser welding with brazing in the IHU-THT co-operation project because brazing conducts significantly less heat into the material to be welded compared to laser welding technology; the metal material does not melt, only the brazing material.’ said Ms Sarah Nothdurft, Project Administrator at LZH. As the pressure deformation processing system is used at pressures of up to 100 MPa during the high-pressure deformation process in the IHU, it was also required that the steel-aluminium brazed tubes could also be deformed together at this high pressure. This eliminates the need for laser welding equipment. And laser brazing technology is likewise a welding technique suitable for high-volume, industrial production. ‘This joining technology uses welded joints with butted seams, as joints in the form of lap joints are an unsuitable joint form in the high-pressure processing process technology within the IHU. It is also important to consider the different deformation processing properties of the material being brazed and the brazing material.’ Ms Sarah Nothdurft continued.


Another task of LZH's Institute for Laser Technology in Hanover was to design a set of brazing heads required for laser brazing. ‘This brazing head should ensure that the back and forth movement of the laser rays reliably ensures the delivery of conventional brazing wires.’ Ms Sarah Nothdurft said. The synthetic movement of the laser rays with the help of the scanner and the feed speed, as well as the power regulation in relation to the brazing temperature, should ensure that the brazing process is optimised.


The combination of two different materials such as steel and aluminium also poses many challenges for the developers: most aluminium alloys are much softer than steel, so they are also very susceptible to deformation. Consequently, the high-pressure deformation process within the IHU for such hybrid structures is much more complex than the deformation process for semi-finished products made of a single material. The steel section of the composite steel is heated slightly before the deformation process begins in order to bring the deformation properties of the steel section into line with those of the aluminium section. ‘After pre-testing the deformation with relatively simple equipment and a short period of internal high-pressure deformation, we obtained the first data on the subject. The specimens used in the pre-tests were laser spliced steel.’ Mr Jonathan Ross said.


Purposeful weight reduction


Based on the results of the pre-tests, the participants in the IHU R&D project on internal high-pressure deformation machining developed a FEM finite element simulation scheme applicable to the internal high-pressure deformation machining process. ‘Based on the results obtained from the simulations, it was possible to perform deformation machining tests on real laser brazed composite tubes using IHU's internal high-pressure deformation machining process technology.’ Mr Jonathan Ross concluded. Through the application of such material combinations, it is possible to reduce the weight of parts, components and assemblies more purposefully than conventional laser brazed parts by using the internal high-pressure deformation machining process to complete the deformation process locally in laser brazed tubes in accordance with the strength characteristics and weight requirements of the material. Since the internal high-pressure deformation process technology combines several traditional deformation processing steps into one process, it can save a lot of production costs due to its high processing speed and fewer processes and steps. Mr Jonathan Ross estimates that, based on current test results, no new equipment technology appears to be required. It is estimated that a slight modification of the existing internal high-pressure deformation processing equipment can be completed.


Laser brazed composite tubes are suitable for use in frame production manufacturing, such as vehicle C-pillar to roof joints, seat frames and dashboard supports, but can also be used in support elements for axle components. Crash protection in car seats and doors and connectors for door panels are also places where this composite tubing can be used.